Welcome to the Tweaking4All community forums!
When participating, please keep the Forum Rules in mind!
Topics for particular software or systems: Start your topic link with the name of the application or system.
For example “MacOS X – Your question“, or “MS Word – Your Tip or Trick“.
Please note that switching to another language when reading a post will not bring you to the same post, in Dutch, as there is most likely no translated for the post!
Arduino motor driver shield-not writing to screen
March 14, 2021 11:48 PM
I tested the sketch without the shield-it writes, but when i add the shield: Arduino Motor Shield Rev 3-nothing.
The current sensing pins are 0 and 1, i don't use them for anything else.
March 15, 2021 7:15 AM
I'm not sure what you're referring to or asking for?
March 17, 2021 12:54 PM
The Arduino motor driver shield has pins that enable sensing how much current is drawn.
I didn't make them work so good but at least i saw something on the monitor, before i added the shield.
After i installed the shield and drove the motors-nothing appears on the screen.
March 19, 2021 4:28 AM
What project are you referring to? As I have zero experience with motors, and do not have any projects involving motors.
Do you have a sketch and/or schematics?