I'm hoping you can implement a feature the looks at the Selected Episode side and Selected File side and highlights words that match on either side. I think this would make it much easier to quickly scan through to determine if the episodes on either side actually match each other.

Hello Hans,

for SMB shares it seems to work.

But I think there is an issue with NFS shares:

I checked the options: Custom Path and “Do not create sub-directory for mounting” / Mount-Point: ~/mnt

When I mount the path I get the following output in the Log Window:

16:38:37 │ Mount requested for: "backup (dxp4800-plus)"
16:38:37 │ - Max Attempts  = 1
         │   Attempts Left = -1
         │   Last Attempt  = n/a
16:38:37 │ - Doing default short mount delay (1 second)
16:38:39 │ - Starting mount background task
16:38:39 │ - RETRY MOUNT TIMER: Started 1 minute timer for remount attempts
16:38:39 │ - Enabled timer for potential extra mount attempts
16:38:39 │ - Thread started
16:38:39 │ Mount status update:
         │ Mount/Open Networkshare feedback (Commandline): 
         │ Mount attempt through Commandline:
         │ 
         │ - Mount path: ~/mnt
         │ - Error - Unable to access or create mount path
16:38:39 │ Thread - Calling for forced status update (only shows results if something changed)
16:38:39 │ -- STATUS UPDATE - THREAD CALLBACK ------------------------------------------------
         │ 
16:38:39 │ Update type
         │  - Initial read     : -
         │  - Timed Interval   : -
         │  - Get Network info : -
         │  - Forced Update    : YES
         │ 
         │ Status Interval     : 10000 milliseconds
         │ Interval Interrupts : 500 milliseconds
         │ Failed mount after  : 30000 milliseconds
         │ 
         │ Default gateway     : 192.168.3.249 (MAC: D8:B3:70:29:2A:6B)
         │ 
16:38:39 │ - Mount Status Updated: Counted 7 active share(s)
16:38:39 │ - Active share: home-christian (dxp4800-plus)(Path: /Users/christian/mnt/home-christian (dxp4800-plus))
16:38:39 │ - Active share: Media-Common (dxp4800-plus)(Path: /Users/christian/mnt/Media-Common (dxp4800-plus))
16:38:39 │ - Active share: Media-Own (dxp4800-plus)(Path: /Users/christian/mnt/Media-Own (dxp4800-plus))
16:38:39 │ - Active share: paperless (dxp4800-plus)(Path: /Users/christian/mnt/paperless (dxp4800-plus))
16:38:39 │ - Active share: Storage (dxp4800-plus)(Path: /Users/christian/mnt/Storage (dxp4800-plus))
16:38:39 │ - Active share: Storage-NB (dxp4800-plus)(Path: /Users/christian/mnt/Storage-NB (dxp4800-plus))
16:38:39 │ - Active share: TEMP (dxp4800-plus)(Path: /Users/christian/mnt/TEMP (dxp4800-plus))
16:38:39 │ - Matched 7 Network shares. (matched all)
16:38:39 │ 
         │ -- STATUS UPDATE - COMPLETED ------------------------------------------------------
16:38:39 │ - RETRY MOUNT TIMER: Stopping timer
16:38:39 │ - RETRY MOUNT TIMER: Quiting, nothing left to retry, and no Fallback servers left either
16:38:39 │ - Updating "Mount onAppear" list
16:38:39 │ - Updating "Mount onAppear" list
16:38:39 │ Updating Tray Menu

If I unset the checkbox for "Do not create sub-directory for mounting", the output is as follows:
16:42:02 │ Mount requested for: "backup (dxp4800-plus)"
16:42:02 │ - Max Attempts  = 1
         │   Attempts Left = -1
         │   Last Attempt  = n/a
16:42:02 │ - Doing default short mount delay (1 second)
16:42:03 │ - Starting mount background task
16:42:03 │ - RETRY MOUNT TIMER: Started 1 minute timer for remount attempts
16:42:03 │ - Enabled timer for potential extra mount attempts
16:42:03 │ - Thread started
16:42:03 │ Mount status update:
         │ Mount/Open Networkshare feedback (Commandline): 
         │ Mount attempt through Commandline:
         │ 
         │ - Mount path: /Users/christian/mnt/mnt (dxp4800-plus)
         │ - CMD: mount_nfs -o nfc "dxp4800-plus:/mnt/nvme/backup" "/Users/christian/mnt/mnt (dxp4800-plus)"
         │ - Result: Mount request did not return an error (not a guarantee that it worked though!)
16:42:03 │ Thread - Calling for forced status update (only shows results if something changed)
16:42:03 │ System Mount Callback: "/Users/christian/mnt/mnt (dxp4800-plus)"
16:42:03 │ Thread - Calling for forced status update (only shows results if something changed)
16:42:03 │ -- STATUS UPDATE - THREAD CALLBACK ------------------------------------------------
         │ 
16:42:03 │ Update type
         │  - Initial read     : -
         │  - Timed Interval   : -
         │  - Get Network info : -
         │  - Forced Update    : YES
         │ 
         │ Status Interval     : 10000 milliseconds
         │ Interval Interrupts : 500 milliseconds
         │ Failed mount after  : 30000 milliseconds
         │ 
         │ Default gateway     : 192.168.3.249 (MAC: D8:B3:70:29:2A:6B)
         │ 
16:42:03 │ - Mount Status Updated: Counted 8 active share(s)
16:42:03 │ - Active share: home-christian (dxp4800-plus)(Path: /Users/christian/mnt/home-christian (dxp4800-plus))
16:42:03 │ - Active share: Media-Common (dxp4800-plus)(Path: /Users/christian/mnt/Media-Common (dxp4800-plus))
16:42:03 │ - Active share: Media-Own (dxp4800-plus)(Path: /Users/christian/mnt/Media-Own (dxp4800-plus))
16:42:03 │ - Active share: paperless (dxp4800-plus)(Path: /Users/christian/mnt/paperless (dxp4800-plus))
16:42:03 │ - Active share: Storage (dxp4800-plus)(Path: /Users/christian/mnt/Storage (dxp4800-plus))
16:42:03 │ - Active share: Storage-NB (dxp4800-plus)(Path: /Users/christian/mnt/Storage-NB (dxp4800-plus))
16:42:03 │ - Active share: TEMP (dxp4800-plus)(Path: /Users/christian/mnt/TEMP (dxp4800-plus))
16:42:03 │ - Active share: backup (dxp4800-plus)(Path: /Users/christian/mnt/mnt (dxp4800-plus))
16:42:03 │ - Matched 8 Network shares. (matched all)
16:42:03 │ Updating Controls to show selected Share Details
16:42:03 │ - New actived share(s): 
         │   - backup (dxp4800-plus)(/Users/christian/mnt/mnt (dxp4800-plus))
16:42:03 │ 
         │ -- STATUS UPDATE - COMPLETED ------------------------------------------------------
16:42:03 │ - RETRY MOUNT TIMER: Stopping timer
16:42:03 │ - RETRY MOUNT TIMER: Quiting, nothing left to retry, and no Fallback servers left either
16:42:03 │ - Updating "Mount onAppear" list
16:42:03 │ - Updating "Mount onAppear" list

Then it looks at it wis OK – but the Folder where the NFS Share is mounted is:

Mount path: /Users/christian/mnt/mnt (dxp4800-plus)

And I think this should be:

Mount path: /Users/christian/mnt/backup (dxp4800-plus)

In the Mac Finder it looks good – but the second NFS-Mount with the same setting produces this error:

16:44:55 │ Mount requested for: "Media-Recordings (dxp4800-plus)"
16:44:55 │ - Max Attempts  = 1
         │   Attempts Left = -1
         │   Last Attempt  = n/a
16:44:55 │ - Doing default short mount delay (1 second)
16:44:56 │ - Starting mount background task
16:44:56 │ - RETRY MOUNT TIMER: Started 1 minute timer for remount attempts
16:44:56 │ - Enabled timer for potential extra mount attempts
16:44:56 │ - Thread started
16:44:56 │ Mount status update:
         │ Mount/Open Networkshare feedback (Commandline): 
         │ Mount attempt through Commandline:
         │ 
         │ - Mount path: /Users/christian/mnt/mnt (dxp4800-plus)
         │ - CMD: mount_nfs -o nfc "dxp4800-plus:/mnt/hdd/Media-Recordings" "/Users/christian/mnt/mnt (dxp4800-plus)"- Error - Possible error occured. Shell may have returned a fail code
         │ - Result: Mount request did not return an error (not a guarantee that it worked though!)
16:44:56 │ Thread - Calling for forced status update (only shows results if something changed)
16:44:57 │ -- STATUS UPDATE - THREAD CALLBACK ------------------------------------------------
         │ 
16:44:57 │ Update type
         │  - Initial read     : -
         │  - Timed Interval   : -
         │  - Get Network info : -
         │  - Forced Update    : YES
         │ 
         │ Status Interval     : 10000 milliseconds
         │ Interval Interrupts : 500 milliseconds
         │ Failed mount after  : 30000 milliseconds
         │ 
         │ Default gateway     : 192.168.3.249 (MAC: D8:B3:70:29:2A:6B)
         │ 
16:44:57 │ - Mount Status Updated: Counted 8 active share(s)
16:44:57 │ - Active share: home-christian (dxp4800-plus)(Path: /Users/christian/mnt/home-christian (dxp4800-plus))
16:44:57 │ - Active share: Media-Common (dxp4800-plus)(Path: /Users/christian/mnt/Media-Common (dxp4800-plus))
16:44:57 │ - Active share: Media-Own (dxp4800-plus)(Path: /Users/christian/mnt/Media-Own (dxp4800-plus))
16:44:57 │ - Active share: paperless (dxp4800-plus)(Path: /Users/christian/mnt/paperless (dxp4800-plus))
16:44:57 │ - Active share: Storage (dxp4800-plus)(Path: /Users/christian/mnt/Storage (dxp4800-plus))
16:44:57 │ - Active share: Storage-NB (dxp4800-plus)(Path: /Users/christian/mnt/Storage-NB (dxp4800-plus))
16:44:57 │ - Active share: TEMP (dxp4800-plus)(Path: /Users/christian/mnt/TEMP (dxp4800-plus))
16:44:57 │ - Active share: backup (dxp4800-plus)(Path: /Users/christian/mnt/mnt (dxp4800-plus))
16:44:57 │ - Matched 8 Network shares. (matched all)
16:44:57 │ 
         │ -- STATUS UPDATE - COMPLETED ------------------------------------------------------
16:44:57 │ - RETRY MOUNT TIMER: Stopping timer
16:44:57 │ - RETRY MOUNT TIMER: Quiting, nothing left to retry, and no Fallback servers left either
16:44:57 │ - Updating "Mount onAppear" list
16:44:57 │ - Updating "Mount onAppear" list
16:44:57 │ Updating Tray Menu

Best regards,

Christian

I was able to get one NAS mounted (I have two), but it doesn't show in Finder.  I have to go to the menubar to "reveal in Finder" but it shows up grayed out with the internal directories/folders visible.  However, once I close that window it's hidden again.  Is there a way to mount it and have it stay visible in Finder?

Thanks

edit to add:  If I navigate through Finder (my old way of mounting it) it seems to mount, but I have no idea how that relates to the mounted drive via ConnectMeNow.  Almost seems as though it's mounted twice.  When I mount through Finder, it shows up in the sidebar.  When I mount via ConnectMeNow and "Reveal in Finder" it doesn't.  I'm really confused.

edit to add2:  The NAS in question has a volume name that is the same as the NAS, and the Volume has directories under it.  In retrospect this may have created some confusion on my part (wasn't NAS proficient when I set it up...still not really).  When I "reveal in finder" it skips the Volume level and goes right to the directories (doesn't really bother me). 

edit to add3: When I go to "Network" under the computer name I see one NAS connected (not the one I'm  setting up in ConnectMeNow) and one drive that appears to me unmounted (the one I AM setting up).  Yet ConnectMeNow is showing it mounted. I'm really confusedx2.

edit to add4: Read the main ConnectMeNow page and it described going to "/Volumes/" to see all connected drives, but I don't see the ConnectMeNow-mounted drive there. I'm really confusedx3.

    Running 2.3.15 on Windows 11.  This particular bug has been around for a few versions though.  There is a series on paramount called Matlock started in 2024.   There is also the original Matlock series from 1986.  When I try to rename the new Matlock I type in Matlock in the search bar, select Matlock (2024) TVDB, and it populates the episode list correctly, I then load the directory with the files to rename, and the auto select picks the episodes from the original Matlock from 1986 even though that is not in the episode list.  So I then delete the auto picks and manually select the episodes and the rename is fine.  This happens on all three sources, TVDB, TVMAZE and TMDB.  This is the only time I have seen this issue so it is a very low priority bug but interesting.  I would attach a snapshot, but the forum says no more attachments are allowed today.

Thanks,

Greg

Normally one would use

git diff > todo.patch

But with Lazarus Pascal this would come with unwanted PO and POT (translation) files, and (under macOS anyway) lazarus.app and startlazarus.app (exclude sections).
Sometimes it also coms with unwanted white space which we'd like to exclude as well (-w option).

All options together this would make

git diff -- . ':(exclude)*.po' ':(exclude)*.pot' ':(exclude)lazarus.app' ':(exclude)startlazarus.app' -w > mychanges.patch

Running this in the Lazarus directory will create a nice and clean Diff file (for small changes).

Hope this is useful for others, at least a nice reminder for myself.

- Make sure your iPhone is up to date (eg. 26.4 or 26.5 at the time of this writing.

- Go to Settings -> General -> Transfer of Reset iPhone -> Reset - > Reset Keyboard Dictionary -> Reset Dictionary

Source: CultOfMac

Im' using CMN for a long time now and love it. Thanks for making new versions.

I found some GUI glitches.

1. IF the "Share Details" window is enlarged to the right. The "Password:" text is moving into the password field.

2. In the "Advanced" Tab, the "ADVANCED" is hiding the text below it. I would share a picture, but only one is allowed.

Greetings,

Marcus